There are two versions of this server, the e and p models. Below are the main differences between the two that might factor into deciding which one to get. The e model makes a great storage server if you don’t need too many PCIe slots (four) and go with the extra 2 SFF in the back. With the two SFF in the back connected to a raid controller it makes a good boot drive with mirrored SSDs. The p model makes a great VM server with a number of PCIe slots (up to 6), extra RAM and an extra two cores per CPU.
DL380 Gen8 Versions:
Takes two Xeon E5-2400 or E5-2400v2 series with up to 10 cores RAM up to 192 Gigs of RDIMMs (DDR3 1333) Storage options: 25 SFF (in front) with 2 more SFF (you lose a secondary riser with PCIe 3.0 x16 and an x8 slots) 12 LFF (in front) with 2 SFF (you lose a secondary riser with PCIe 3.0 x16 and an x8 slots) 8 SFF (in front) with option for 8 SFF (in front)
Takes two Xeon E5-2600 or E5-2600v2 series with up to 12 cores RAM up to 384 Gigs of RDIMMs (DDR3 1333) 25 SFF (in front) 12 LFF (in front) 8 SFF (in front) with option for 8 SFF (in front)
Both use the same hot swap power supplies that are either 92% efficient or 94% efficient. For more details on options for either model do a google search with “dl380e gen8 quickspecs” or “dl380p gen8 quickspecs” for their pdf. These make great starter servers for virtualization and storage servers while using very efficient power supplies. I’ve seen the 94% power supplies on eBay for less than $30.00 each. My 380e has dual 4 core CPUs with 24 gigs of ram, eight 2.5” hard drives raid-6, and a 10Gbit ethernet card. It runs at about 140 watts with one VM running 24/7 on Hyper-V 2019. The fan noise on this generation of servers is not that bad but you don’t want to hear it all day so it still needs to be somewhere that the noise and heat can be isolated. I measured the noise of my server about 6 inches (150mm) from the back (after it settled down from first boot) and I was seeing just under 50dB.
HPE DL380 Gen 8 Introduction
The DL380 is a dense and compact server powered by Intel® Xeon® E5-2600 and E5-2600v2 processors and provides a unique blend of enterprise-class capabilities at a great value—making it an ideal rack server platform for growing businesses and service providers. It offers outstanding configuration flexibility to cater to a wide variety of business requirements at an affordable price point. The DL380 Gen8 Server offers a range of HPE Qualified options to fit most needs like affordable drives for light workloads, solid state drives for the demanding requirements, with dual high efficient hot pluggable power supply, multiple storage controllers, and the HPE FlexibleLOM networking cards (with either four 1 gig ports or two 10 Gig ports with either copper or optical support).
• On the VMware 6 U3 (if you want VMware 6.5 you need Gen9 or better, 6.7 or higher needs Gen10) • Runs Server 2019 Hyper-V and Xen Cloud Platform • Very quiet (by rack mount standards (I’ve recorded mine running under 50dB at less than 6 inches (150mm) from the power supplies)) • 2U server • On-board USB 3.0 for boot • Choice of 3.5" or Hot-swap 2.5" hard drives or SSDs • Choice of CPU families • Choice of a single PSU or 2 to have a redundant PSU • 192GB or 384BG of RDIMM • Dedicated iLO port • Front panel System Insight Display
• No USB 3.0 ports - USB 2.0 only • Fans can be loud if room temperature is to warm.
• $300 or thereabouts for the basic server • Depending on where you buy it might come with 1 x 8GB • No HDDs or caddies
These make great starter servers for virtualization or storage servers and use very efficient power supplies. Normally comes with 92% efficient power supplies but I’ve seen the 94% power supplies on eBay for less than $30.00 each.